ATS TRYTEX - Draw Frame

Features

• Single Delivery
• 3 over 3 spring loaded drafting system
• Draft range 5 to 15
• Individual drive
• Power 0.75 kw
• No Compressed air is required for the machine except for cleaning

Technical Details:

• Kind of drafting. SKF Top Arm PK 1601
• The type and details of cot: Accotex J490
• Coiler Details: 10”
• Roller Dia. : 30mm/3mm/30mm
• Calender Dia. : 50 mm
• Can size: 10”X32”

ATS TRYTEX - Speed Frame

• Computer controlled.
• Four Spindle machine
• 3 over 3 spring loaded drafting system
• Draft range 6 to 12
• Electronic building motion
• No Cone drum
• Power 1.5 kw
• No Compressed air is required for the machine except for cleaning

ATS TRYTEX - Carding Machine

Features

• Minimum sample size would be 50gms or 120gms
• Quick processing time
• 10 Width
• Metallic wire clothing
• Individual drive
• Power 0.75kw
• No Compressed air is required for the machine except for cleaning

Card Clothing Details:

• Make : ICC
• Liker In : 4.5 TPI, F.A: 90 Deg,
• Cylinder: : Wire number of ICC: T-415; F.A: 60 Deg; 717ppsi
• Doffer: : Wire Number of ICC: D-8360; F.A: 60 Deg; 358ppsi
• Flat Tops : XL3; 271ppsi

Card Technical Details:

• Licker-in Dia: 126mm; Cylinder 250mm; Doffer:
• Since diameter is one fourth of the regular card of the surface speed would match regular card at 500 to 1000rpm
• Dimensions of Cans: 10”X32”
• Doffer speed would be 10 to 30 rpm, could be varied through potentiometer.

Card

• Feed plate to liker in: 0.010”
• Feed plate to feed roller: 0.01”
• Liker in under casing to liker in: 0.30”
• Liker in to cylinder: 0.005”
• Cylinder to cylinder under casing at the starting point: 10mm to 12mm.
• Cylinder to cylinder under casing at the end: 12mm.
• Cylinder to doffer: 0.005”
• Doffer to stripping roller: 0.001”
• Stripping Roller to Crush Roller: 0.10” Cylinder to flats: 0.010”.